HC06 Bluetooth Module
HC06 Bluetooth Module
The HC06 bluetooth module is a Bluetooth device designed for wireless serial communication in a transparent case. It becomes easy to use when paired with bluetooth device via computers, mobile phones and tablets.
All data received on the serial input bus is instantly transmitted wirelessly. When the module receives wireless data, data is sent via the serial interface. In fact, there is no need for bluetooth module-specific user interface code in the user microcontroller application.
HC06 voltage; It works with a supply voltage of 3.6 Volts to 6 Volts. But here the logic level of the rxd pin is 3.3 Volts and is not 5 Volt tolerant. Actually, it is recommended to use a logic level converter to protect this sensor when connected to a 5 Volt device (Example: Arduino Uno / Arduino Nano / Arduino Mega).
HC06 BT Module does not support AT command.
HC06 Bluetooth Module Application
The usage areas of this module are electronic projects. So bluetooth based Robotic projects using (8051 / PIC / AVR / NXP / Infineon / ARM) microcontroller. It can also be used in hobby-style projects, electronic engineering applications, robotic mobile phone applications, computer servers, computer peripherals, entertainment applications, usb key areas.
You can apply the HC06 Bluetooth using the remote control 4WD robot car project and the 2WD robot car project.
HC06 Technical Information
-80dBm sensitivity.
RF power is transmitted up to +4dBm.
Low Power Usage; 1.8V Operation, 3.3 – 5V I/O.
PIO control.
UART interface with programmable baud rate.
Integrated antenna.
With edge connector.
Slave default Baud rate; 9600 baud.
data bits; 8
stop bit; one
Parity: There is no parity. Auto-connect to last device by default. It is allowed to connect by default on the pairing device.
Automatic matching Pin Code; “1234” is the pin code used by default.
If the device is out of the connection range, it can automatically reconnect within 30 minutes when disconnected.
